TK ACOUSTIC LAB
LOUDSPEAKERJOURNAL

RCF

TT 10-A

Self-Powered PA LoudspeakerActive Loudspeaker

A compact two-way PA loudspeaker dividing 10-inch LF and 1-inch HF drivers at 900Hz, with a rotatable 90° × 70° horn, 1,000W RMS amplification, FiRPHASE and RDNet.

Drivers
10in LF + 1in HF
Nominal coverage
90° × 70°
Amplification
1,000W RMS Class D
Official page
Published in the Journal
Official three-quarter front view of the RCF TT 10-A
Image: RCF

Product Overview

The TT 10-A is a two-way self-powered PA loudspeaker in RCF's TT+ series, combining a 10-inch LF driver with a 1-inch-exit HF compression driver. Its crossover is set at 900Hz, nominal coverage is 90° horizontal × 70° vertical, and the horn can be rotated to suit cabinet orientation.

A two-channel Class D amplifier delivers 700W RMS to the LF section and 300W RMS to the HF section, with onboard DSP. Alongside analogue XLR input and output, EtherCON ports provide RDNet control and monitoring. The enclosure supports pole mounting, flown installation and floor-monitor use.

Specifications

System
Two-way self-powered PA loudspeaker
Drivers
LF: 10in neodymium cone with 2.5in voice coil; HF: 1in-exit neodymium compression driver with 1.75in voice coil
Frequency response
60Hz–20kHz
Maximum SPL
130dB at 1m
Nominal coverage
90° horizontal × 70° vertical, rotatable horn
Crossover
900Hz
Amplification
LF: 700W RMS / 1,400W peak; HF: 300W RMS / 600W peak; two-channel Class D
Signal processing
FiRPHASE, system EQ, polarity, limiter and high-pass filter
Connections
Analogue XLR input/link and EtherCON RDNet input/link
Dimensions
490mm H × 306mm W × 299mm D
Weight
11.5kg
Mounting
M10, Quick Fit, pole mount and 35° floor-monitor angle

Design & Technology

10-inch LF with a 900Hz crossover

A 10-inch LF driver and 1-inch-exit HF compression driver are crossed over at 900Hz. The constant-directivity HF horn provides nominal 90° × 70° coverage and can be rotated for vertical or horizontal cabinet orientation.

Independent LF/HF Class D amplification and DSP

The built-in Class D amplifier delivers 700W RMS to the LF section and 300W RMS to the HF section. DSP includes RCF FiRPHASE processing, system EQ, polarity and limiting, while local controls provide flat/high-pass selection, level and RDNet-control bypass.

Separate audio and control networks

Official rear view of the RCF TT 10-A showing XLR, RDNet, power connections and controls
Image: RCF

Audio is linked through the XLR connections, while RDNet uses separate EtherCON input and link ports. Multiple units can therefore be configured and monitored over the control network while the analogue audio chain remains independently wired.

Flown, pole-mounted and floor-monitor use

The Baltic-birch enclosure provides M10 and Quick Fit rigging points plus a pole socket. A 35° cabinet side supports floor-monitor placement, allowing the same enclosure to serve as a compact main, fill, delay or stage monitor.

Sources

  1. 01
    RCFTT 10-A

    Manufacturer product page · Accessed August 16, 2026

  2. 02
    RCFTT 10-A Specification Sheet

    Official datasheet · Accessed August 16, 2026

  3. 03
    RCFTT 10-A Owner's Manual

    Official manual · Accessed August 16, 2026