T10
A three-way line-source module with dual 10in LF, dual 6.5in MF, 4in dual-diaphragm HF, 3,000W Class D amplification and multi-axis robotic directivity control.
- Drivers
- 2 × 10in LF + 2 × 6.5in MF + 4in HF
- Maximum SPL
- Up to 146dB
- Robotic directivity
- 60–120° horizontal / 0–12° vertical
Product Overview
T10 is a medium-format three-way self-powered line-source module in PK Sound's Trinity range. Two bandpass-loaded 10in LF drivers, two 6.5in MF drivers mounted to a CMI waveguide and a 4in dual-diaphragm HF coupled to a planar waveguide are powered by a four-channel 3,000W Class D amplifier and onboard DSP.
Horizontal coverage is adjustable from 60° to 120° in 5° steps, with symmetric or asymmetric settings. Inter-cabinet vertical angle is adjustable from 0° to 12° in 0.1° increments. Both axes are controlled remotely by onboard industrial linear actuators, while inclinometers, IR sensors and networking allow coverage to be changed from PK .dynamics after the array has been flown.
Specifications
- System
- Three-way self-powered robotic line-source module
- Drivers
- LF: 2 × 10in neodymium bandpass-loaded; MF: 2 × 6.5in; HF: 4in dual-diaphragm planar-wave driver
- Frequency response
- 40Hz–20kHz
- Maximum SPL
- 146dB at 1m with crest-factor-4 pink noise and limiter/DSP active
- Robotic directivity
- Horizontal 60–120° in 5° symmetric/asymmetric steps; vertical 0–12° in 0.1° increments
- Amplification
- Four-channel Class D, 3,000W total
- Input / network
- Analogue/AES input, proprietary network and Amphenol multipin audio/network connector
- Actuator duty cycle
- 80,000 actuations
- Maximum array length
- 24 modules
- Dimensions
- 250 × 980 × 561mm (H × W × D)
- Weight
- 47.6kg
Design & Technology
Bandpass-loaded 10in LF drivers
Two 10in LF drivers operate in bandpass-loaded internal chambers and radiate through spaced apertures on the front. PK Sound combines these LF apertures with the central CMI waveguide to maintain horizontal pattern continuity.
MF/HF integration through CMI
Two 6.5in MF drivers mount to the patented Coherent Midrange Integrator, while the 4in dual-diaphragm HF feeds the central planar waveguide. The CMI combines MF and HF into one variable-directivity section.
Symmetric or asymmetric 60–120° horizontal coverage
Actuators on both sides move the CMI and surrounding LF-aperture geometry to change horizontal coverage in 5° steps. In addition to symmetric patterns, the two sides can be set independently for asymmetric coverage.
Remote 0.1° vertical adjustment
An actuator within the rigging sets inter-cabinet angle from 0° to 12° in 0.1° increments. The array can be flown straight and each module then adjusted remotely for the audience geometry.
Integrated amplification, DSP and sensors
Each module integrates four-channel 3,000W Class D amplification, DSP, networking, an inclinometer and IR sensors. FIR and IIR filters handle frequency response and crossover processing, with limiter and monitoring functions controlled per enclosure.
Auto-Array and remote coverage changes
Auto-Array in PK .dynamics uses onboard sensor and network data to identify each module's position and angle. Mechanical splay, horizontal coverage and DSP are managed in one control environment, allowing coverage changes after deployment for audience areas, reflective surfaces and neighbouring zones.
Sources
- 01PK SoundT10
Manufacturer product page · Accessed August 15, 2026
- 02PK SoundT10 Product Specification
Official datasheet · Accessed August 15, 2026
- 03PK SoundT10 User Manual v2.0
Official manual · Accessed August 15, 2026
- 04PK SoundPK Sound .dynamics System Control Software Now Available
Manufacturer press release · Accessed August 15, 2026